Engine Control System
INSPECTION CHART FOR DIAGNOSTIC TROUBLE CODESP0101 - P0141:
P0171 - P0551:
P0705 - P1751:
NOTE: Do not replace the engine control module (ECM) [M/T] or powertrain control module (PCM) [A/T] until a through terminal check reveals there are no short/open circuits.
NOTE: Check that the ECM [M/T] or PCM [A/T] ground circuit is normal before checking for the cause of the problem.
NOTE: After the ECM [M/T] or PCM [A/T] detects a malfunction, a diagnostic trouble code is recorded the next time the engine is started and the same malfunction is re-detected. However, for items marked with a "*," the diagnostic trouble code is recorded on the first detection of the malfunction.
NOTE: Sensor 1 indicates the sensor mounted at a position closest to the engine, and sensor 2 indicates the sensor mounted at the position second closest to the engine.