Selector Mechanism Overview

Selector Mechanism Overview






1 Selector Lever Cable

• Do not bend.

• Removing and installing, refer to => [ Selector Lever Cable ] Service and Repair.

• Adjusting, refer to => [ Selector Lever Cable, Checking and Adjusting ] Adjustments.

2 Retainer Plate

3 Pin

4 Cover

• With the selector lever scale.

• Removed together with the selector lever knob and boot => [ (Item 6) Selector Lever Knob and Boot ].

5 Clamp

• Removing and installing, refer to => [ Selector Lever Knob and Boot ] Selector Lever Boot, Separating from Handle.

6 Selector Lever Knob and Boot

• Removing and installing, refer to => [ Selector Lever Knob and Boot ] Selector Lever Boot, Separating from Handle.

7 Screw

• 6.5 Nm

• Quantity: 4

8 Selector Lever Sensor System Control Module (J587) with Tiptronic Switch (F189)

• Removing and installing, refer to => [ Selector Lever Sensor System Control Module (J587) with Tiptronic Switch (F189) ] Selector Lever Sensor System Control Module (J587) with the Tiptronic Switch (F189).

9 Shift Lock Solenoid (N110)

• Removing and installing, refer to => [ Shift Lock Solenoid (N110) ] Service and Repair.

10 Selector Mechanism

• With the transmission park selector switch (F305) installed.

• Removing and installing, refer to => [ Selector Mechanism ] Selector Mechanism.

11 Bolt

• 6.5 Nm

• Quantity: 4

12 Bolt

• 6.5 Nm

• Quantity: 2

13 Bolt

• 10 Nm

• Quantity: 4

14 Selector Housing

• Can only be removed downward.

15 Bracket