Rear Seat Belt

REAR SEAT BELT

SEAT BELT RETRACTOR : Removal and Installation


REMOVAL

Outer seat belt retractor
1.Remove outer anchor.
1.Remove rear seat cushion from the vehicle.
Refer to "SEAT CUSHION : Removal and Installation" Seat Cushion.
2.Remove outer anchor mounting anchor bolt.
2.Remove shoulder anchor.
1.Remove rear seatback from the vehicle.
Refer to "SEAT CUSHION : Removal and Installation" Seat Cushion.
2.Remove luggage side lower finisher.
Refer to "LUGGAGE SIDE LOWER FINISHER : Removal and Installation" Luggage Side Lower Finisher.
3.Remove luggage floor upper finisher.
Refer to "LUGGAGE FLOOR UPPER FINISHER : Removal and Installation" Luggage Floor Upper Finisher.
4.Remove shoulder anchor mounting anchor bolt.
3.Remove outer seat belt retractor mounting anchor bolt, and then remove outer seat belt retractor.
Center seat belt retractor
1.Remove center anchor.
1.Remove rear seat cushion from the vehicle.
Refer to "SEAT CUSHION : Removal and Installation" Seat Cushion.
2.Remove center anchor mounting anchor bolt.
2.Remove rear seatback LH from the vehicle.
Refer to "SEATBACK : Removal and Installation" Seatback.
3.Remove seatback trim and seatback pad from seatback frame.
Refer to "SEATBACK : Disassembly and Assembly" Seatback.
4.Remove seatback silencer from seatback frame.
Refer to "SEATBACK : Disassembly and Assembly" Seatback.
5.Remove center seat belt retractor.





1.Remove mounting bolts (A) of upper webbing guide (1).
Remove upper webbing guide from seatback frame.
2.Disengage pawls of lower webbing guide (2). Remove lower webbing guide in direction indicated by arrow as shown in the figure.
3.Remove mounting anchor nut (B) of center seat belt retractor (3) from seatback frame.


INATALLATION

Install in the reverse order of removal.