Luggage Floor Upper Finisher

LUGGAGE FLOOR TRIM

LUGGAGE FLOOR UPPER FINISHER : Removal and Installation


CAUTION:
- When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
- Never damage the body.

REMOVE

1.Remove rear parcel shelf finisher. Refer to "REAR PARCEL SHELF FINISHER : Removal and Installation" Rear Parcel Shelf Finisher.
2.Remove luggage floor board. Refer to "LUGGAGE FLOOR BOARD : Removal and Installation" Luggage Floor Board.
3.Remove luggage floor upper finisher.





a.Apply protective tape (A) on the parts to protect it from damage.





b.Remove luggage floor upper finisher fixing clips (A).
c.Disengage luggage floor upper finisher fixing pawls with a remover tool (B), and then remove luggage floor upper finisher.

CAUTION:
Always remove the part while lifting it up toward vehicle upper. Or otherwise, the parts that are stuck in luggage side lower finisher may be damaged.


INSTALLATION

Note the following item, and install in the reverse order of removal.

CAUTION:
When installing, check in advance that pawls are accurately aligned with the holes on body side, and then install by pressing in.