LED Headlamps Overview
LED Headlamps Overview
Observe notes on contact corrosion => [ Contact Corrosion ] Service Precautions.
Headlamp Housing, Control Modules
1 Screw
• 1.5 Nm
• Quantity 4
2 Screw
• 1.5 Nm
• Quantity 3
3 Power Output Stage 3 for LED Headlamp
• For daytime running lamp/parking lamp, turn signal
• Left LED headlamp power output module 3 (A33) , right LED headlamp power output module 3 (A29)
• Removing and Installing, refer to => [ Right and Left Power Output Module 3 (A29)/(A33) ] Right and Left Power Output Module 3 (A29)/(A33).
4 Screw
• 1.5 Nm
• Quantity: 2
5 Ventilation
• For headlamp housing.
6 Headlamp Housing
• Removing and installing, refer to => [ Headlamp Housing ] Headlamp Housing.
7 Screw
• 4.5 Nm
8 Screw
• 4.5 Nm
9 Headlamp Fan 2
• Left headlamp fan 2 (V463) , right headlamp fan 2 (V464).
• Removing and installing, refer to => [ Headlamp Fan 2 (V463)/(V464) ] Headlamp Fan 2 (V463)/(V464).
10 Screw
• 2 Nm
• Quantity: 2
11 Housing Cover For The Headlamp Fan
• The headlamp housing must be cut open to replace the fan.
• A housing cover can be ordered to seal the assembly opening. Refer to Electronic Parts Catalog (ETKA).
• Removing and installing, refer to => [ Headlamp Fan 2 (V463)/(V464) ] Headlamp Fan 2 (V463)/(V464).
12 Screw
• 2 Nm
• From the repair kit for the headlamp fan cover.
• Quantity: 3
13 Screw
• 2 Nm
14 Clip
• For the headlamp cover
• Removing and installing, refer to => [ Headlamp Housing Repair Set, Installing ] Headlamp Housing Repair Set, Installing
15 Screw
• 6 Nm
16 Headlamp Fan
• Left headlamp fan (V407) , right headlamp fan (V408).
• Removing and installing, refer to => [ Headlamp Fan (V407)/(V408) ] Headlamp Fan (V407)/(V408).
17 Power Output Stage 2 for LED Headlamp
• For high beam, cornering lamp.
• Left LED headlamp power output module 2 (A32) , right LED headlamp power output module 2 (A28)
• Removing and installing, refer to => [ Right and Left Power Output Module 2 (A28)/(A32) ] Right and Left Power Output Module 2 (A28)/(A32).
18 Power Output Stage 1 For LED Headlamp
• For low beam
• Left LED headlamp power output module 1 (A31) , Right LED headlamp power output module 1 (A27)
• Removing and installing, refer to => [ Right and Left Power Output Module 1 (A27)/(A31) ] Right and Left Power Output Module 1 (A27)/(A31).
19 Screw
• 1.5 Nm
• Quantity: 4