Headlamp Fan (V407)/(V408)

Headlamp Fan (V407)/(V408)

Removing






- Remove the power output stage 2 for LED headlamp. Refer to => [ Right and Left Power Output Module 2 (A28)/(A32) ] Right and Left Power Output Module 2 (A28)/(A32).

- Remove the bolts - 2 and 5 -.

- Remove the fan - 4 - behind the cover - 1 -.

- Remove the fan upward - arrow - as shown in the illustration.

- Disconnect the electrical connector - 3 -.

Installing

• Tightening specification, refer to => [ LED Headlamps Overview ] LED Headlamps Overview.

Install in reverse order of removal. Note the following:

- Install the power output stage 2 for LED headlamp, refer to => [ Right and Left Power Output Module 2 (A28)/(A32) ] Right and Left Power Output Module 2 (A28)/(A32).