Engine Compartment E-Box, Wire Junction, Fuse Holder and Battery Overview

Engine Compartment E-Box, Wire Junction, Fuse Holder and Battery Overview

Observe the notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.






1 Engine Compartment E-box

• Removing and installing, refer to => [ Engine Compartment E-Box ] Engine Compartment E-Box.

2 Fuse Panel B (SB)

• Relay/fuse panel in engine compartment E-box.

• Removing and installing, refer to => [ Fuse Panel B, Engine Compartment E-Box ] Fuse Panel B, Engine Compartment E-Box.

• With suppressor (C24) removing and installing. Refer to => [ Suppressor ] Suppressor.

3 Cover

• For the engine compartment E-box.

4 Terminal 30 Wire junction 2 (TV22)

• Removing and installing, refer to => [ Terminal 30 Wire Junction 2 ] Terminal 30 Wire Junction 2.

5 Right Front Door Cut Off Connector

• Disconnecting, refer to => [ Door Cut-Off Connector, Disconnecting ] Door Cut-Off Connector, Disconnecting.

6 Right Rear Door Cut Off Connector

• Disconnecting, refer to => [ Door Cut-Off Connector, Disconnecting ] Door Cut-Off Connector, Disconnecting.

7 Fuse Panel A (SA)

• In the luggage compartment on the battery.

• Removing and installing, refer to => [ Fuse Panel A, Luggage Compartment ] Fuse Panel A, Luggage Compartment.

8 Battery

9 Left Rear Door Cut Off Connector

• Disconnecting, refer to => [ Door Cut-Off Connector, Disconnecting ] Door Cut-Off Connector, Disconnecting.

10 Left Front Door Cut Off Connector

• Disconnecting, refer to => [ Door Cut-Off Connector, Disconnecting ] Door Cut-Off Connector, Disconnecting.

11 Engine Control Module (ECM)

Engine Compartment E-Box Bolt Tightening Specification






1. Bolt - 3.5 Nm

2. Engine compartment E-box cover

3. Bolt - 4.5 Nm

4. Engine compartment E-box


Fuse Panel B in Engine Compartment E-Box Bolt Tightening Specification






1. Positive wire - 9 Nm

2. Fuse panel B

3. Electrical wire on the back - 9 Nm


Terminal 30 Wire junction 2 Bolt Tightening Specifications






1. Fan wire - 7.5 Nm

2. Fan wire - 7.5 Nm

3. PTC line - 18 Nm

4. Nut - 7.5 Nm

5. E-box positive wire - 7.5 Nm

6. Battery wire - 16 Nm

7. Battery jump start terminal (U6) - 20 Nm

8. Bolt - 7.5 Nm

9. Positive cable Starter - 18 Nm

10. Nut - 7.5 Nm


Fuse Panel A Bolt Tightening Specifications






1. Electrical wire - 7.5 Nm

2. Nut - 9 Nm

3. Nut - 9 Nm

4. Fuse panel A inside the luggage compartment

5. Positive wire to the engine - 7.5 Nm

6. Bolt - 3.5 Nm

7. Battery interrupt igniter (N253).

8. Electrical wire - 18 Nm