Suppressor

Suppressor

Removing

- Remove fuse panel B inside the engine compartment E-box. Refer to => [ Fuse Panel B, Engine Compartment E-Box ] Fuse Panel B, Engine Compartment E-Box.

• The electrical connectors do not need to be disconnected.

- Disconnect the cable tie - 2 -.






- Disconnect the electrical connector - 1 -.

- Remove the suppressor (C24) - item 3 -.

Installing

Install in reverse order of removal, observing the following:

• When installing, install cable ties at same location.

- Install fuse panel B into the engine compartment E-box. Refer to => [ Fuse Panel B, Engine Compartment E-Box ] Fuse Panel B, Engine Compartment E-Box.