Terminal 30 Wire Junction 2

Terminal 30 Wire Junction 2

Removing






Vehicles through 05.08

- Unclip the plenum chamber cover - 2 - and remove it.

• Ignore items - 1 and 3 - and the - arrow -.

Vehicles from 06.08






- Remove the bolts - 3 -.

- Remove the clips - 2 - from the mounts and remove the plenum chamber cover- 1 -.

Continuation for All Vehicles






- Release the retainer - arrow A - and open the cover - arrow B -.

- Disconnect the wires - 1, 2, 3, 5, 6 and 9 -.






- Remove the bolt - 8 - and remove the terminal 2 wire junction 30 (TV22) from the strut tower.

• Ignore - 4, 7 and 10 -.

Installing

• Tightening specification, refer to => [ Terminal 30 Wire junction 2 Bolt Tightening Specifications ] Engine Compartment E-Box, Wire Junction, Fuse Holder and Battery Overview.

Install in reverse order.