Underbody Impact Guard for Engine

Underbody Impact Guard for Engine

Removing





- Front bumper, vehicles through 10.2006, removing, refer to => [ Bumper Cover ] Bumper Cover

- Front bumper, vehicles from 11.2006 >, removing, refer to => [ Bumper Cover Assembly Overview ] Bumper Cover Assembly Overview

- Remove the bolts - 2 -, - 3 -, - 4 - and - 5 - and remove underbody impact guard for engine - 1 -.

Installation





- Position underbody impact guard for engine - 1 - and bolt it with bolts - 2 -, - 3 -, - 4 - and - 5 -.

Tighten all bolts from assembly overview of underbody impact guard for engine to tightening specification. Refer to => [ Underbody Impact Guard for Engine Assembly Overview ] Underbody Impact Guard for Engine Assembly Overview.