Underbody Impact Guard for Engine Assembly Overview

Underbody Impact Guard for Engine Assembly Overview





1 Underbody impact guard for engine

• Removing and Installing, refer to => [ Underbody Impact Guard for Engine ] Underbody Impact Guard for Engine

2 Bolt

• Quantity: 2

• Tightening specification: 40 Nm

3 Bolt

• 2 pieces per side

• Tightening specification: 25 Nm

4 Bolt

• left and right

• Tightening specification: 20 Nm

5 Screws

• Quantity: 5

• Tightening specification: 20 Nm