Bumper Cover Assembly Overview

Bumper Cover Assembly Overview

• Due to model variations, small deviations must be considered during removal and installation.





1 Bumper cover

• Material - PP/EPDM

• Removing and Installing, refer to => [ Bumper Cover ] Bumper Cover

2 Bolt

• Quantity: 4

• 6 Nm

3 Bolt

• Quantity: 2, installed through vent grille

• 2 Nm

4 Bolt

• Quantity: 5, 1 at top and 4 to wheel housing liner

• 2 Nm

5 Bolt

• Quantity: 6

• 2 Nm

6 Spring nut

• Left and right

7 Guide trim