Bumper Cover

Bumper Cover

• Due to model variations, small deviations must be considered during removal and installation.

Removing





- Remove radiator grille, refer to => [ Radiator Grille, through 10.2006 ] Radiator Grille, through 10.2006.

- Loosen the front of the wheel housing liner. Refer to => [ Front Wheel Housing Liner Assembly Overview ] Description and Operation

- Remove the bolts - 2 -.

- Remove bolts - 5 - from below.

- Remove bolts - 3 - in area of wheel housing liner.

- Release the retaining tabs under the left and right headlights - arrows -.

- With the assistance of a second technician, remove cover out of guide trims - 4 - parallel to vehicle.

- Depending on vehicle equipment, disconnect the wiring harnesses and hoses from the electrical components.

Installation

To install, perform the steps used for removal in reverse order.