Installation
PARKING BRAKE: PARKING BRAKE CABLE: INSTALLATION
1. INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY
(a) Install the No. 2 parking brake cable assembly onto the backing plate with the bolt.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Install the No. 2 parking brake cable assembly with the 3 bolts.
Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)
2. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY
(a) Install the No. 3 parking brake cable assembly onto the backing plate with the bolt.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Install the No. 3 parking brake cable assembly with the 3 bolts.
Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)
3. INSTALL REAR BRAKE SHOE KIT Reassembly
4. INSTALL REAR BRAKE DRUM
5. ADJUST REAR DRUM BRAKE SHOE CLEARANCE Installation
6. INSTALL REAR WHEELS
Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)
7. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY
(a) Connect the cable ends of the No. 2 and No. 3 parking cable assemblies to the No. 1 parking cable assembly.
8. INSTALL PARKING BRAKE CABLE COVER
(a) Insert the 2 guides.
(b) Using the 2 clips, install the parking brake cable cover.
(c) Engage the 2 hooks of the floor carpet and place the floor carpet in its original position.
(d) Install the floor carpet with the clip.
9. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY Installation
10. ADJUST PARKING BRAKE TRAVEL Adjustments
11. INSTALL REAR CONSOLE BOX ASSEMBLY Installation
12. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation
13. INSTALL SIDE NO. 1 TRIM ASSEMBLY RH Installation
14. INSTALL SIDE NO. 1 TRIM ASSEMBLY LH Installation
15. INSTALL DECK TRIM SIDE BELT HOLE COVER RH Installation
16. INSTALL DECK TRIM SIDE BELT HOLE COVER LH Installation
17. INSTALL REAR DECK TRIM COVER Installation
18. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH Installation
19. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH Installation
20. INSTALL FRONT DOOR SCUFF PLATE RH Installation
21. INSTALL FRONT DOOR SCUFF PLATE LH Installation
22. INSTALL LUGGAGE COMPARTMENT TRAY
23. INSTALL REAR SEAT ASSEMBLY
Installation
24. INSTALL FRONT SEAT ASSEMBLY
Installation