Removal

THEFT DETERRENT: ENGINE HOOD COURTESY SWITCH: REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
* w/ Navigation System (for HDD):
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal:





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE ENGINE ROOM SIDE COVER LH Removal

4. REMOVE ENGINE ROOM SIDE COVER RH Removal

5. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY Removal

6. REMOVE COOL AIR INTAKE DUCT SEAL Removal

7. REMOVE RADIATOR GRILLE Removal

8. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY Removal

9. REMOVE HOOD LOCK CONTROL CABLE COVER Removal

10. REMOVE FRONT FENDER PROTECTOR UPPER LH Removal

11. REMOVE HOOD LOCK ASSEMBLY Removal