Radiator

Radiator

• Make sure when replacing the expansion tank and for maintenance work that there is always a silicate cartridge in the expansion tank, refer to the Parts Catalog. The silicate cartridge must not be removed.

Removing

- Drain the coolant. Refer to => [ Coolant, Draining and Filling ] Procedures.

- Move the lock carrier into the service position. Procedures

- Remove the fan shroud. Refer to => [ Fan Shroud and Fans ] Service and Repair.

- Remove the air duct bolts - arrows - and duct from the lock carrier.






- Disconnect the coolant hoses from the radiator.

- Remove the bolts - 1 and 2 - and remove the radiator upward.






Installing

Install in the reverse order of removal.

For the correct tightening specifications, refer to => [ Cooling System Components Overview, Body Side ] Cooling System Components Overview, Body Side.

- Fill the coolant. Refer to => [ Coolant, Draining and Filling ] Procedures.