Right Flange Shaft Seal, Outside of Bevel Box

Right Flange Shaft Seal, Outside of Bevel Box

Special tools, testers and auxiliary items required

• Thrust Piece (T10049)

Removing

The seal can be replaced with the transmission installed.

- Remove the right flange shaft. Refer to => [ Right Flange Shaft, AWD ] Right Flange Shaft, AWD.

- Pry the seal out of the flange shaft with a lever.

Installing

- Install the new seal using the thrust piece (T10049).






- Fill the area between the sealing and dust lips - arrow - halfway with sealing grease for seal (G 052 128 A1).






- Install the right flange shaft. Refer to => [ Right Flange Shaft, AWD ] Right Flange Shaft, AWD.

- Check the oil level in the bevel box and fill, as necessary. Refer to => [ Bevel Box Gear Oil Level, Checking and Filling ] Procedures.