Driver Side Lower A-Pillar Trim

Driver Side Lower A-Pillar Trim

Removing

- Remove left, side instrument panel cover. Refer to => [ Instrument Panel Side Covers ] Instrument Panel Side Covers

- Remove the hood release lever.

- Remove the upper trim on the left B-pillar from the brackets. Refer to => [ B-Pillar Upper Trim, Loosening from Mounts and Securing ] B-Pillar Upper Trim, Loosening from Mounts and Securing

- Remove the lower trim on the left B-pillar. Refer to => [ Lower B-Pillar Trim ] Lower B-Pillar Trim

- Remove clip - 1 -.

- Remove the trim - 2 - from the body - arrow -.






Installation

• Before installation, clip - 1 - must be checked for damage and replaced if necessary.

• Before installing, check the mounting elements - 3 - and replace if necessary.






- Install in reverse order of removal.

- Make sure, that the trim is placed in the in the door seal piping.