Lower B-Pillar Trim

Lower B-Pillar Trim

• The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

Vehicles with interior monitoring (driver side)

- Switch off ignition.

All vehicles

- Remove the B-pillar upper trim. Refer to => [ B-Pillar Upper Trim, Loosening from Mounts and Securing ] B-Pillar Upper Trim, Loosening from Mounts and Securing

- Remove the trim - 1 - in the upper area form the body - arrow A -.






- Remove the trim upward out of the retainers in the sill area - arrows B -.

- Open the lid - 1 - and guide the seat belt - 2 - through it.






Installation

• Before installing, check the mounting clamps and replace if necessary.

- Install in reverse order of removal.

- Make sure, that the trim is placed in the in the door seal piping.