Installation

2AR-FE COOLING: WATER PUMP: INSTALLATION

1. INSTALL WATER PUMP ASSEMBLY

(a) Install a new gasket and the water pump with the 7 bolts.





Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)

2. INSTALL V-RIBBED BELT TENSIONER ASSEMBLY (for Compressor and Generator) Reassembly

3. INSTALL GENERATOR ASSEMBLY Installation

4. INSTALL V-RIBBED BELT (for Compressor and Generator) Installation

5. INSTALL V-RIBBED BELT (for Vane Pump) Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

7. ADD ENGINE COOLANT Testing and Inspection

8. INSPECT FOR COOLANT LEAK Testing and Inspection

9. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation

10. INSTALL FRONT FENDER APRON SEAL RH

11. INSTALL ENGINE UNDER COVER RH

12. INSTALL ENGINE UNDER COVER LH

13. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

14. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

15. INSTALL FRONT WHEEL RH