Removal And Installation

FLOOR TRIM

Removal and Installation


REMOVAL

1.Remove front seat assembly (LH/RH). Removal and Installation.
2.Remove rear seat cushion and seatback assembly (with rear seat). Removal and Installation.
3.Remove instrument lower cover, glove box lid and instrument lower panel. Removal And Installation.
4.Remove front seatbelt anchor bolt. Exploded View.
5.Remove front and rear kicking plate inner. Removal And Installation.
6.Remove dash side finisher. Removal And Installation.
7.Remove center pillar lower garnish. Removal And Installation.
8.Remove front body side welt and rear body side welt. Removal And Installation.





9.Remove front floor bracket (1) mounting nuts (A) and then remove front floor bracket.
10.Disconnect airbag harness connector and remove drain hose.





11.Remove floor carpet fixing clip (A).
12.Remove luggage rear plate. Removal And Installation.
13.Remove luggage side lower finisher (LH/RH). Removal And Installation.
14.Remove floor carpet through the back door.

INSTALLATION

Install in the reverse order of removal.