Removal and Installation

REAR SEAT

Removal and Installation


REMOVAL


CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.Remove the headrest.





2.Remove the pawls, and then remove seat slide cover.

Broken triangle indicates : Pawl

3.Remove the rear right side mounting bolt.
4.Remove the rear left side mounting bolt.
5.Remove the front right side mounting bolt.
6.Remove the front left side mounting bolt.
7.Remove the rear seat assembly from back door.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.