Removal And Installation

REAR SEAT BELT

Removal and Installation


REMOVAL OF SEAT BELT RETRACTOR (SEDAN)

1.Remove the rear seat cushion and seat back. Sedan.
2.Remove the outer anchor bolt.
3.Remove the rear parcel shelf finisher. Rear Parcel Shelf Finisher Sedan.
4.Remove retractor anchor bolt, then remove seat belt retractor.

INSTALLATION OF SEAT BELT RETRACTOR (SEDAN)

Installation is in the reverse order of removal.
- Always perform an inspection after repair to be sure the system in functioning within specifications. Refer to
Procedures.

REMOVAL OF SEAT BELT RETRACTOR (COUPE OUTER)

1.Remove the rear seat cushion and seat back. Coupe.
2.Remove upper pillar finisher and rear lower finisher. Removal And Installation Coupe.
3.Remove the anchor bolt, then remove D-ring anchor bolt.
4.Remove retractor screw and retractor anchor bolt, then remove seat belt retractor outer.

INSTALLATION OF SEAT BELT RETRACTOR (COUPE OUTER)

Installation is in the reverse order of removal.
- Always perform an inspection after repair to be sure the system is functioning within specifications. Refer to
Procedures.

REMOVAL OF SEAT BELT RETRACTOR (COUPE CENTER)

1.Remove the rear seat cushion and seat back. Coupe.
2.Remove the rear parcel shelf finisher. Rear Parcel Shelf Finisher Coupe.
3.Remove the anchor bolt.
4.Remove the retractor anchor bolt, then remove seat belt retractor center.

INSTALLATION OF SEAT BELT RETRACTOR (COUPE CENTER)

Installation is in the reverse order of removal.
- Always perform an inspection after repair to be sure the system is functioning within specifications. Refer to
Procedures.

REMOVAL OF SEAT BELT BUCKLE

1.Remove the rear seat cushion. Coupe.
2.Remove buckle anchor bolt, then remove the seat belt buckle. Exploded View.

INSTALLATION OF SEAT BELT BUCKLE

Installation is in the reverse order of removal.
- Always perform an inspection after repair to be sure the system is functioning within specifications. Refer to
Procedures.