Rear Parcel Shelf Finisher Sedan

REAR PARCEL SHELF FINISHER

Removal and Installation - Rear Parcel Shelf Finisher


REMOVAL

1.Release seatback latches (RH/LH), then fold both rear seatbacks to forward most position.
2.Release the clips, then remove seatback latch cover.
3.Remove the key cylinder cover and child anchor covers from the rear parcel shelf finisher. Child Anchor And Key Cylinder Covers Sedan.
4.Remove high mounted stop lamp. Service and Repair.
5.Remove rear pillar finishers (RH/LH). Removal And Installation Sedan.
6.Thread the rear seat belts (RH/LH/Center) through vertical opening and release from rear parcel shelf finisher.
7.Using a suitable tool, release the clips, then remove rear parcel shelf finisher.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
Make sure that clips are fully aligned with panel holes on body when installing, then press them in completely.