Luggage Floor Front Finisher

LUGGAGE FLOOR TRIM

LUGGAGE FLOOR FRONT FINISHER : Removal and Installation


CAUTION:
- When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
- Never damage the body.

REMOVE

1.Remove rear seat cushion. Refer to "SEAT CUSHION : Removal and Installation" Seat Cushion.
2.Remove rear seatback. Refer to "SEATBACK : Removal and Installation" Seatback.
3.Remove luggage floor upper finisher. Refer to "LUGGAGE FLOOR UPPER FINISHER : Removal and Installation" Luggage Floor Upper Finisher.
4.Remove luggage floor front finisher.





a.Remove luggage floor front finisher fixing pawls (A) and screws (B).
b.Pull up luggage floor front finisher, and then disengage luggage floor front finisher fixing pawls, and then remove luggage floor front finisher.

CAUTION:
Always remove the part while lifting it up toward vehicle upper. Or otherwise, the parts that are stuck in luggage side lower finisher may be damaged.

INSTALLATION

Install in the reverse order of removal.