Removal

WIPER AND WASHER: HEADLIGHT CLEANER ACTUATOR: REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. REMOVE ENGINE ROOM SIDE COVER LH Removal

2. REMOVE ENGINE ROOM SIDE COVER RH Removal

3. REMOVE AIR CLEANER COVER SUB-ASSEMBLY Removal

4. REMOVE COOL AIR INTAKE DUCT SEAL Removal

5. REMOVE RADIATOR GRILLE Removal

6. REMOVE FRONT FENDER WHEEL OPENING MOULDING LH

7. REMOVE FRONT FENDER WHEEL OPENING MOULDING RH Removal

8. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH Removal

9. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH Removal

10. REMOVE FRONT FENDER LINER LH Removal

11. REMOVE FRONT FENDER LINER RH Removal

12. REMOVE FRONT BUMPER COVER Removal

13. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH Removal

14. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH Removal

15. REMOVE HEADLIGHT CLEANER HOSE

(a) Disconnect the headlight cleaner hose from the headlight washer actuator sub-assemblies.

(b) Detach the 7 clamps and remove the headlight cleaner hose.

16. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH

(a) Remove the headlight cleaner clamp as shown in the illustration.

(b) Pull down the headlight cleaner clamp B and remove it.

17. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH

HINT
Use the same procedure described for the LH side.