Front Center Console

Front Center Console

Removing






- Remove center console side trim. Refer to => [ Center Console Side Trim ] Center Console Side Trim.

- Remove the center console trim: for vehicles with a manual transmission, refer to => [ Center Console Trim, Vehicles with Manual Transmission ] Center Console Trim, Vehicles with Manual Transmission; for vehicles with DSG, refer to => [ Center Console Trim, DSG Transmission ] Center Console Trim, DSG Transmission.

- Remove parking brake lever handle cover. Refer to => [ Parking Brake Lever Handle Cover ] Parking Brake Lever Handle Cover.

- Remove ashtray. Refer to => [ Ashtray ] Ashtray.

- Remove screws - 1 to10 -.

• Illustrated on a vehicle with DSG.

- Pull the parking brake up as far as possible.






- Pull rear of center console up - arrow A - and guide it past the parking brake lever by sliding center console as far forward as possible - arrow B -.

- Remove center console back over selector lever or shift lever.

Installation






Install in reverse order of removal. Note the following:

- Check adjusting element adjustment nut - 1 - for ease of movement - arrows -.

- Install adjustment nuts all the way, but do not tighten.

• When tightening bolts, adjusting element adjustment nuts turn by themselves against the center console mounting points and secure it.

For the correct tightening specifications; refer to => [ Center Console Assembly Overview ] Description and Operation.