Parking Brake Lever Handle Cover

Parking Brake Lever Handle Cover

Removing






- Remove the center console trim: for vehicles with a manual transmission, refer to => [ Center Console Trim, Vehicles with Manual Transmission ] Center Console Trim, Vehicles with Manual Transmission; for vehicles with DSG, refer to => [ Center Console Trim, DSG Transmission ] Center Console Trim, DSG Transmission.

- Engage parking brake.

- Remove screws - 1 - and - 2 -.

- Remove parking brake lever handle cover - 3 - upward at front side - arrow - and remove it forward from center console.

Installation

Install in reverse order of removal. Note the following:

- Make sure the parking brake lever handle cover is inserted correctly in spring clip.

For the correct tightening specifications; refer to => [ Center Console Assembly Overview ] Description and Operation.