Relay and Fuse Carrier In Instrument Panel and A-Pillar Overview

Relay and Fuse Carrier in Instrument Panel and A-Pillar Overview






1 4 Pin Relay/Fuse Panel and Threaded Connection

• Under the left of the instrument panel.

• Removing and installing, refer to => [ 4 Pin Relay/Fuse Panel with Threaded Connection ] 4 Pin Relay/Fuse Panel With Threaded Connection.

2 Vehicle Electrical System Control Module (J519)

• Different versions. Refer to Electronic Parts Catalog (ETKA).

• Removing and installing, refer to => [ Vehicle Electrical System Control Module (J519) ] Vehicle Electrical System Control Module (J519).

3 Relay/Fuse Panel Mount for Vehicle Electrical System Control Module

• Removing and installing, refer to => [ Relay/Fuse Panel Mount with Vehicle Electrical System Control Module ] Relay/Fuse Panel Mount With Vehicle Electrical System Control Module.

4 3 Pin Relay/Fuse Panel

• Under the left of the instrument panel.

• Removing and installing, refer to => [ 3 Pin Relay/Fuse Panel ] 3 Pin Relay/Fuse Panel.

5 Passenger Side A-Pillar 6 Pin Connector Station

• Removing and installing, refer to => [ Passenger Side A-Pillar 6 Pin Connector Station ] Passenger Side A-Pillar 6 Pin Connector Station.

6 Fuse Panel D (SD)

• On the right of the instrument panel.

• Removing and installing, refer to => [ Fuse Panel D with Right Instrument Panel Fuse Panel ] Fuse Panel D With Right Instrument Panel Fuse Panel.

7 Right Central Tube

8 Instrument Panel CAN Cut Off Connector (T46s)

• Removing and installing, refer to => [ Instrument Panel CAN Cut Off Connector ] Instrument Panel CAN Cut Off Connector.

9 Left Central Tube

10 Fuse Panel C (SC)

• On the left of the instrument panel.

• Removing and installing, refer to => [ Fuse Panel C with Left Instrument Panel Fuse Panel ] Fuse Panel C With Left Instrument Panel Fuse Panel.

11 Interior CAN Cut Off Connector (T46i)

• Removing and installing, refer to => [ Interior CAN Cut Off Connector ] Interior CAN Cut Off Connector.

12 Driver Side A-Pillar 6 Pin Connector Station

• On the left of the instrument panel.

• Removing and installing, refer to => [ Driver Side A-Pillar 6 Pin Connector Station ] Driver Side A-Pillar 6 Pin Connector Station.

Relay/Fuse Panel Mount Tightening Specifications





1. Retaining pins

2. Nuts - 3 Nm

3. Relay/fuse panel mount with vehicle electrical system control module


4 Pin Relay/Fuse Panel with Threaded Connection, Tightening Specifications





1. Electrical wire - 9 Nm

2. Electrical wire - 9 Nm

3. 4 pin relay/fuse panel