Motor Overview and Hydraulic Pump Fluid Reservoir

Motor Overview and Hydraulic Pump Fluid Reservoir






1 Bolt

• 6 Nm

• Quantity: 4

2 Motor

• For the hydraulic pump.

• Removing and installing, refer to => [ Hydraulic Pump Motor ] Hydraulic Pump Motor.

3 Seal

• Replace

• Before installing, lightly coat with hydraulic fluid.

4 Tappet

5 Valve Block

6 Noise Insulation Upper Section

7 Oil Filler Screw

• 2 Nm

8 Oil Reservoir

• Removing and installing, refer to => [ Hydraulic Pump Fluid Reservoir ] Hydraulic Pump Fluid Reservoir.

9 Retaining Bolt

• 6.5 Nm

10 Power Convertible Top Valve

• Power convertible top valve 1 (N272) , power convertible top valve 2 (N341) , power convertible top valve 3 (N342)

• Removing and installing, refer to => [ Power Convertible Top Valves (N272)/(N341)/(N342) ] Power Convertible Top Valves (N272)/(N341)/(N342).

11 Clamp

• 3.5 Nm

12 Seal

• Replace

• Before installing, lightly coat with hydraulic fluid.

13 Noise Insulation Lower Section

Hydraulic Pump, Tightening Specification





- Tighten the nut - 1 - and bolt - 6 - to 10 Nm.

Hydraulic Line, Tightening Specification





- Tighten the bolt to - 2 - to 6 Nm.