Coolant Pump

Coolant Pump

Special tools, testers and auxiliary items required

• Spanner Wrench (3212)

Removing






- Drain the coolant. Refer to => [ Coolant, Draining and Filling ] Service and Repair.

- Remove the ribbed belt from the A/C compressor but do not remove it completely. Refer to => [ Ribbed Belt ] Ribbed Belt.

- Remove the bolts - arrows - for the coolant pump ribbed belt pulley using a (3212) to counterhold.

- Remove the bolts and remove the ribbed belt pulley.

• Use a cloth to catch any leaking coolant.

- Remove the bolts - arrows - and remove the coolant pump.






Installing

• For the correct tightening specifications, refer to => [ Coolant Pump and Thermostat Overview ] Coolant Pump and Thermostat Overview.

- Clean the sealing surfaces; they must be free of oil and grease.

- Install the Air Conditioning (A/C) compressor ribbed belt. Refer to => [ Supercharger Ribbed Belt ] Supercharger Ribbed Belt.

- Fill the coolant system => [ Filling ] Service and Repair.