Selector Mechanism Overview

Selector Mechanism Overview

There is a risk of injury and accident from accidentally engaging a gear when the engine is running.

• Before performing work with the engine running, place the selector lever in the "P" position and engage the parking brake.






1 Selector Lever Cable

• Do not bend

• Overview, refer to => [ Selector Lever Cable Overview ] Description and Operation

2 Locking Plate

• Overview, refer to => [ Selector Lever Cable Overview ] Description and Operation

3 Selector Lever Cable Screws

• Overview, refer to => [ Selector Lever Cable Overview ] Description and Operation

4 Plastic Sleeve

• Overview, refer to => [ Selector Lever Handle Overview ] Selector Lever Handle Overview

5 Selector Lever Boot

• Overview, refer to => [ Selector Lever Boot, Separating from Handle ] Selector Lever Boot, Separating From Handle

6 Decorative Ring

• Separating, refer to => [ Selector Lever Boot, Separating from Handle ] Selector Lever Boot, Separating From Handle

7 Selector Lever Handle

• Overview, refer to => [ Selector Lever Handle Overview ] Selector Lever Handle Overview

8 Selector Lever Transmission Range Position Display Unit (Y26)

• Removing and installing, refer to => [ Selector Lever Transmission Range Position Display Unit (Y26) ] 0C8A Automatic Transmission

9 Bolt

• 1 Nm

• Quantity: 4

10 Selector Lever Sensor System Control Module (J587) with Tiptronic Switch (F189)

• Removing and installing, refer to => [ Selector Lever Sensor System Control Module (J587) with the Tiptronic Switch (F189) ] Selector Lever Sensor System Control Module (J587) With the Tiptronic Switch (F189)

11 Shift Lock Solenoid (N110)

• Removing and installing, refer to => [ Shift Lock Solenoid (N110) ] Service and Repair

• Emergency release, refer to => [ Selector Mechanism, Perform Emergency Release ] Selector Mechanism, Perform Emergency Release

12 Selector Mechanism Function Unit

• Checking, refer to => [ Selector Mechanism, Checking ] Selector Mechanism, Checking

• Removing and installing, refer to => [ Shift Mechanism Function Unit ] Shift Mechanism Function Unit

• Overview, refer to => [ Selector Mechanism Function Unit Overview ] Selector Mechanism Function Unit Overview

• With transmission park selector switch (F305)

• Removing and installing, refer to => [ Transmission Park Selector Switch (F305) ] Service and Repair

13 Threaded Pin

• 6.5 Nm

• Quantity: 4

• For the selector mechanism function unit to the lower section

14 Bolt

• 6.4 Nm

• Quantity: 2

• For the centering bracket to the lower section of the selector mechanism function unit

15 Bolt

• 10 Nm

• Quantity: 4

• For the lower section of the selector mechanism function unit to the body

16 For the Lower Section of the Selector Mechanism Function Unit

• Removing and installing, refer to => [ Selector Mechanism Function Unit, Lower Section ] Selector Mechanism Function Unit, Lower Section

17 Centering Bracket

• May not be installed again if it is damaged or removed; necessary for factory production only