Rear Center Armrest Cupholder

Rear Center Armrest Cupholder

Removing






- Remove the cupholder trim. Refer to => [ Cup Holder Trim ] Cup Holder Trim.

- Open the flap - 1 - on the cupholder.

- Press the clamp - 3 - on one side in the - direction of the arrow - using a screwdriver and carefully remove the cupholder trim over the retaining tab - 2 - from the center armrest.

- Repeat the process on the opposite side and remove the cupholder.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Rear Center Armrest Assembly Overview ] Rear Center Armrest Assembly Overview.