Cup Holder Trim

Cup Holder Trim

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing






- Fold down rear center armrest.

- Pry off the trim - 2 - using a trim removal wedge (3409).

- Release the tabs - arrows - starting at the lower edge.

- Release the tabs - 3 -.

- Remove the trim from the rear center armrest.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Rear Center Armrest Assembly Overview ] Rear Center Armrest Assembly Overview.