Right Flange Shaft Seat on Outer Bevel Box

Right Flange Shaft Seat on Outer Bevel Box

Special tools, testers and auxiliary items required

• Thrust Piece (T10049)

• Grease, refer to the Parts Catalog

Procedure

• The sealing ring can be replaced with transmission still installed.

• Refer to => [ Repair Information ] 02EA Transmission.

• Refer to => [ Clean Working Conditions ] Clean Working Conditions.

- Remove the right flange shaft. Refer to => [ Right Flange Shaft ] Right Flange Shaft

- Pry out flange shaft seal with lever.

- Drive in new shaft seal as far as stop using (T10049).






- Fill the space between the sealing and dust lip - arrow - half way with sealing grease; sealing grease, refer to the Parts Catalog.






- Install the right flange shaft. Refer to => [ Right Flange Shaft ] Right Flange Shaft

- Refer to => [ Oil Level in Bevel Box, Checking and Topping Off ] Oil Level In Bevel Box, Checking and Topping Off.