Seals and Gaskets: Description and Operation

Flange Shaft, Seals and Bracket on Bevel Box Overview






1 - Countersunk Bolt

• 30 Nm

• Replace

• For the right flange shaft

• Removing and installing, refer to => [ Right Flange Shaft ] Right Flange Shaft

• Removing and installing, refer to => [ Right Flange Shaft Seat on Outer Bevel Box ] Right Flange Shaft Seat on Outer Bevel Box

5 - Seal on Transmission between Bevel Box and Transmission

• Removing and installing, refer to => [ Seal between Bevel Box and Transmission ] Seal Between Bevel Box and Transmission

6 - Nut

• 20 Nm

7 - Gearshift Lever

• Removing and installing, refer to => [ Selector Shaft Seal ] Selector Shaft Seal

8 - Selector Shaft Seal

• Removing and installing, refer to => [ Selector Shaft Seal ] Selector Shaft Seal

9 - Left Flange Shaft Seal

• Removing and installing, refer to => [ Left Flange Shaft Seal ] Left Flange Shaft Seal

10 - Left Flange Shaft

• Removing and installing, refer to => [ Left Flange Shaft ] Left Flange Shaft

11 - Countersunk Bolt

• 30 Nm

• Replace

A - Bevel Box Bracket

• Bevel box bracket for vehicles with four-cylinder, 2.0L TFSI engine. Tightening specification and sequence => [ Bevel Box Bracket for Vehicles with 4-Cylinder, 2.0L TFSI - Tightening Specification and Sequence ] 02EA Transmission

• Bevel box bracket for vehicles with six-cylinder, 3.2L engine. Tightening specification and sequence => [ Bevel Box Bracket for Vehicles with 6-Cylinder 3.2L Engine - Tightening Specification and Sequence ] 02EA Transmission

B - Bevel Box

C - Transmission