Drive Plate Overview

Drive Plate Overview

Vehicles Built through 05.10






1 Drive Plate

• Removing and installing, refer to => [ Drive Plate ] Drive Plate

2 Washer

• Thickness 3.4 mm

3 Bolt

• Replace

• 30 Nm plus an additional 90° turn

4 Alignment Bushing

5 Centering Bushing for Torque Converter

• Install in the crankshaft

6 Crankshaft Shaft Seal, Transmission Side

• Removing and installing, refer to => [ Crankshaft Seal, Transmission Side ] Service and Repair.

7 Shim

• Thickness 0.06 in

Vehicles Built from 06.10






1 Drive Plate

• Removing and installing, refer to => [ Drive Plate ] Drive Plate

2 Washer

3 Bolt

• Replace

• 30 Nm plus an additional 90° turn

4 Washer

5 Sensor Wheel

• For the engine speed (RPM) sensor (G28)

6 Crankshaft Shaft Seal, Transmission Side

• Removing and installing, refer to => [ Crankshaft Seal, Transmission Side ] Service and Repair

7 Centering Bushing for Torque Converter

• Install in the crankshaft

8 Alignment Bushing