Fan Shroud: Service and Repair

Fan Shroud

Special tools, testers and auxiliary items required

• Hose Clip Pliers (V.A.G 1921)

Removing

- Remove the bolts - 1 - from above.






- Remove center noise insulation fasteners - 1 to 4 -.






- Remove the air duct - 1 and 2 - for charge air cooler.






- Disconnect the connector - 2 -.






- Remove bolts - 3 - and remove the fan shroud downward and off.

Installing

Install in reverse order of removal. Note the following:

• For the correct tightening specifications, refer to => [ Radiator and Coolant Fan Overview ] Radiator and Coolant Fan Overview

- Air guide pipes with connector, installing. Refer to => [ Hose Connections with Connector Couplings, Assembling ] Hose Connections with Connector Couplings, Assembling.