Audio-Navigation Switch Panel Removal/Installation (With Navigation)

Audio-Navigation Switch Panel Removal/Installation

With Navigation

SRS components are located in this area. Review the SRS component locations, Locations and the precautions and procedures Service and Repair before doing repairs or service.

NOTE:

- Put on gloves to protect your hands.

- Take care not to scratch the dashboard and related parts.

- Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage.

- Eject all the discs before removing the audio-navigation unit to prevent damaging the CD/DVD player's load mechanism.

- Discharge static electricity from your body before and during the work.

1. Remove the audio-navigation unit. Audio-Navigation Unit Removal/Installation (With Navigation)

2. Remove the interface dial. Service and Repair
Do not touch the terminal connector (A) of the audio-navigation switch panel with your bare hands. (If you have touched it, wipe it off thoroughly.)

3. Install the audio-navigation switch panel in the reverse order of removal.