Center Rear Seat Belt

Center Rear Seat Belt

Removing

- Turn off the ignition.

- Remove the 2/3 unit of the bench seat. Refer to => [ Bench Seats ] Bench Seats.

- Remove the 2/3 unit of the rear bench seat. Refer to => [ Rear Seats ] Rear Seats.

- Remove the outer trim of the 2/3 unit. Refer to => [ Outer Trims of the Rear Seats ] Outer Trims of the Rear Seats.

- Remove the pass-through. Refer to => [ Pass-Through ] Pass-Through.

- Remove the headrest of the 2/3 unit. Refer to => [ Headrest ] Headrest.

- Remove the headrest guides of the 2/3 unit. Refer to => [ Rear Headrest Guides ] Rear Headrest Guides.

- Remove the rear center belt anchor. Refer to => [ Rear Center Belt Anchor ] Rear Center Belt Anchor.

- Remove the cover and cushion of the 2/3 unit. Refer to => [ Rear Seat Backrest Covers and Cushion ] Rear Seat Backrest Covers and Cushion.

- Unscrew the nut - 1 -, detach the automatic belt retractor - 2 - and pull the seat belt - 3 - with the belt anchor through the console.






Installation

- Pull the seat belt - 3 - with the belt anchor through the console.

- Center the automatic belt retractor - 2 - and bolt with the nut - 1 -.

The tightening specification for the nut - 1 - is 50 Nm.

Further assembling is in reverse order of removal.