Rear Center Belt Anchor

Rear Center Belt Anchor

Removing

- Turn off the ignition.

- Remove the 2/3 unit of the bench seat. Refer to => [ Bench Seats ] Bench Seats.

- Remove the 2/3 unit of the rear bench seat. Refer to => [ Rear Seats ] Rear Seats.

- Unscrew the bolt - 4 - and drive the clamping pins - 1 - and - 3 - into the backrest frame with a drift.






- Carefully remove the belt guide - 2 - from the console.

Installation

- Clip the belt guide - 2 - into the console.






• The belt guide latches must engage completely in the mount openings.

• The belt guide must lie evenly on the console.

- Secure the belt guide via the clamping pins - 1 - and - 3 -.

Check whether the belt guide latches are fully engaged and undamaged.

- Position the belt anchor - 5 - on the console.

Ensure that the anti-twist mechanism is in the console opening - arrow -.

- Secure the belt anchor with the bolt - 4 -.

The tightening specification for the bolt - 4 - is 50 Nm.