Input Shaft, Output Shafts, Differential and Selector Shaft Overview

Input Shaft, Output Shafts, Differential and Selector Shaft Overview






1 Output Shaft, 1st to 4th Gears

• Overview, refer to => [ Output Shaft Overview, 1st to 4th Gears ] Output Shaft Overview, 1st to 4th Gears.

• Installed position, refer to => [ Selector Shaft with Selector Fork, Installed Position ].

2 Selector Shaft with Selector Fork, for 1st and 2nd Gears

• Installed position, refer to => [ Selector Shaft with Selector Fork, Installed Position ].

3 Selector Shaft with Selector Fork, for 3rd and 4th Gears

• Installed position, refer to => [ Selector Shaft with Selector Fork, Installed Position ].

4 Output Shaft, 5th, 6th and Reverse Gears

• Overview, refer to => [ Output Shaft, 5th, 6th and Reverse Gears ] Output Shaft, 5th, 6th and Reverse Gears.

• Installed position, refer to => [ Selector Shaft with Selector Fork, Installed Position ].

5 Selector Shaft with Selector Fork, for 5th and 6th Gears

• Installed position, refer to => [ Selector Shaft with Selector Fork, Installed Position ].

6 Reverse Gear Selector Fork

• Installed position, refer to => [ Selector Shaft with Selector Fork, Installed Position ].

7 Input Shaft

• Overview, refer to => [ Input Shaft Overview ] Input Shaft Overview.

• Always replace the grooved ball bearing (- item 4 - in the => [ Input Shaft Overview ] Input Shaft Overview) on the input shaft.

8 Thrust Washer

• Installed on the reverse shaft - item 9 -.

9 Reverse Shaft

10 Thrust Washer

11 Breather Assembly

• Connects with the clutch slave cylinder with release bearing - item 15 -.

12 Clutch Housing

• Disassembly and assembly, refer to => [ Clutch Housing ] Clutch Housing.

13 Input Shaft Seal

• Removing and installing, refer to => [ Input Shaft Seal ] Input Shaft Seal.

14 O-ring

• Install on the line connection.

• Coat with brake fluid before installing.

15 Clutch Slave Cylinder with Release Bearing

16 Bolt

• Quantity: 3

• Always replace.

• Removing and installing, see - item 4 - in the => [ Clutch Release Mechanism Overview ] Clutch Release Mechanism Overview.

17 Countersunk Bolt

• 33 Nm

18 Flange Shaft with Pressure Spring

• Removing and installing, refer to => [ Right Flange Shaft and Seal ] Right Flange Shaft and Seal.

• Assembling, refer to => [ Differential Overview ] Description and Operation.

19 Differential

• Overview, refer to => [ Differential Overview ] Description and Operation.

Selector Shaft with Selector Fork, Installed Position





1 Input shaft
2 Output shaft, 1st to 4th gears
3 Output shaft, 5th, 6th and reverse gears
4 Reverse shaft
A 3rd and 4th gear selector shaft with selector fork
B 1st and 2nd gear selector shaft with selector fork
C 5th and 6th gear selector shaft with selector fork
D Reverse gear selector fork

• The reverse gear selector fork - D - is mounted on the 5th and 6th gear selector shaft - C -.