Center Console Mounting Bracket and Footwell Trim Mounting Bracket, Jetta from MY 10 and Golf Wagon from MY 10

Center Console Mounting Bracket and Footwell Trim Mounting Bracket, Jetta from MY 10 and Golf Wagon from MY 10

Removing

- Switch off the ignition.

- Remove center console:

• Basis (Jetta from MY 10 and Golf Wagon from MY 10), refer to => [ Center Console, Basis, Jetta from MY 10 and Golf Wagon from MY 10 ] Center Console, Basis, Jetta from MY 10 and Golf Wagon from MY 10.

• Highline (Jetta from MY 10 and Golf Wagon from MY 10), refer to => [ Center Console, Highline, Jetta from MY 10 and Golf Wagon from MY 10 ] Center Console, Highline, Jetta from MY 10 and Golf Wagon from MY 10.

- Remove the two nuts - 3 - (8 Nm) and remove the center console mounting bracket - 2 -.

- Remove the nut - 4 - (2.5 Nm) and remove the footwell trim panel mounting bracket - 1 -.

• Removing the right footwell trim panel mounting bracket it identical.






Installing

- Install in reverse order of removal.