Seal Between Manual Transmission and Bevel Box, Replacing at Manual Transmission

Seal between Manual Transmission and Bevel Box, Replacing at Manual Transmission

Special tools, testers and auxiliary items required

• Pulling Hook (T20143/2)

• Drip Tray (V.A.G 1306)

• Thrust Piece (T10243)

• Extractor Lever (VW 681)

- Place the (V.A.G 1306) underneath.

- Pry out the bevel box seal using (T20143/2) or (VW 681).

- Fill the area between the sealing lip and dust lip - arrow - halfway with sealing grease (G 052 128 A1).






- Lightly oil new seal on outer circumference.

- Install the seal all the way.






- Check axle oil in the bevel box. Refer to => [ Axle Oil in Bevel Box, Checking or Filling ] Procedures.

- Check transmission fluid level inside the manual transmission. Refer to => [ Transmission Fluid, Checking ] Service and Repair.