Shock Absorber and Coil Spring Assembly Overview

Shock Absorber and Coil Spring Assembly Overview





1 Upper spring support

2 Coil spring

• Note different suspension versions, refer to --> [ Vehicle Data Label ] Vehicle Data Label.

• Removing and installing, refer to --> [ Coil Spring ] Coil Spring.

3 Lower spring support

• Spring end rotated up to stop.

4 Bolt, 180 Nm

• M14 x 1.5 x 70.

5 Bolt, 50 Nm + 45° additional turn

• Always replace after removal.

6 Shock absorber

• Removing and installing, refer to --> [ Shock Absorber ] Shock Absorber.

• Note different suspension versions, refer to --> [ Vehicle Data Label ] Vehicle Data Label.

7 Lower transverse link

• Removing and installing, refer to --> [ Lower Transverse Link ] Lower Transverse Link.

8 Wheel bearing housing

• Removing and installing, refer to --> [ Wheel Bearing Housing ] Wheel Bearing Housing.