Removal (to 12/2010)

SUPPLEMENTAL RESTRAINT SYSTEM: REAR AIRBAG SENSOR: REMOVAL

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.

1. PRECAUTION

CAUTION:
Be sure to read the "PRECAUTION" thoroughly before servicing Precaution (to 12/2010).

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

3. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

4. REMOVE REAR SEAT ASSEMBLY LH Removal

5. REMOVE REAR DOOR SCUFF PLATE LH Removal (to 12/2010)

6. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

7. REMOVE REAR SEAT SIDE GARNISH LH

8. REMOVE REAR AIRBAG SENSOR LH

(a) Disconnect the connector from the rear airbag sensor LH.





(b) Remove the bolt and the rear airbag sensor LH.