Removal (to 12/2010)

TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (w/ Antenna): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

3. REMOVE REAR SEAT HEADREST ASSEMBLY

4. REMOVE REAR SEATBACK LOCK COVER CAP Removal

5. REMOVE REAR SEATBACK ASSEMBLY LH Removal

6. REMOVE REAR DOOR SCUFF PLATE LH Removal (to 12/2010)

7. REMOVE REAR SEAT SIDE GARNISH LH Removal (to 12/2010)

8. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH Removal (to 12/2010)

9. REMOVE TIRE PRESSURE WARNING RECEIVER ASSEMBLY

(a) Disconnect the connector.





(b) Remove the bolt and the tire pressure warning receiver assembly.