Seatback Striker

REAR SEAT

SEATBACK STRIKER : Removal and Installation


REMOVAL

1.Remove seatback from the vehicle. Refer to "SEATBACK : Removal and Installation" Seatback.
2.Remove seat cushion from the vehicle. Refer to "SEAT CUSHION : Removal and Installation" Seat Cushion.
3.Remove mounting anchor bolts of outer anchor of seat belt, and then remove outer anchor.
4.Remove luggage side lower finisher from the vehicle. Refer to "LUGGAGE SIDE LOWER FINISHER : Removal and Installation" Luggage Side Lower Finisher.
5.Remove mounting bolts of striker, and then remove striker from the vehicle.

INSTALLATION

Note the following item, and then install in the reverse order of removal.

CAUTION:
When installing striker, tighten mounting bolts to the specified torque according to the numerical order as shown in the figure.
For the specified torque, refer to "Exploded View" Exploded View.





- LH side





- RH side