Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU (w/ Receiver): INSTALLATION

INSTALLATION





1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER
(a) Install the ECU with the 2 bolts.
Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)
(b) Connect the 2 connectors.
2. INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER LOWER Installation
3. INSTALL AIR CONDITIONING CONTROL ASSEMBLY Installation
4. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation
5. INSTALL REAR CONSOLE UPPER PANEL GARNISH Installation
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION (for Tire Pressure Warning System)
(a) When the ECU is replaced, perform initialization Initialization.
8. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.