Installation

AUDIO / VISUAL: RADIO RECEIVER: INSTALLATION

INSTALLATION

1. INSTALL RADIO RECEIVER ASSEMBLY





(a) Install the No. 1 bracket with the 2 screws.
(b) Install the No. 2 bracket with the 2 screws.





(c) Attach the 2 claws to install the panel.
(d) Install the 4 bolts.
(e) Install the 3 panel retainers with the 4 screws.





2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER
(a) Connect the connector.
(b) Install the panel with the 4 bolts.
NOTICE:
- If the connector is connected with the battery connected, the system will start initialization.
- Vibration during initialization may cause problems in the radio receiver.

3. INSTALL AIR CONDITIONING CONTROL ASSEMBLY Installation
4. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation
5. INSTALL REAR CONSOLE UPPER PANEL GARNISH Installation
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

8. CHECK SRS WARNING LIGHT Installation